Make a bin for used heated sticks to 3D print.

A lift-off lid with a slot or funnel, sized to your sticks.

5 min readGeneratorsUpdated 15 Nov 2026

Open the stick bins generator

Square cream bin with a terracotta diamond-knurled band and its funnel lid on top.

The Stick Bins generator makes a small bin for used heated tobacco sticks, for a desk, a car door pocket or a balcony table. Used sticks go in through a slot or a funnel in the lid and stay out of sight. To empty the bin, you lift the lid off and tip it out. You set the size of your sticks, and the slot or the hole is cut to let one through; a band at the foot can take a second colour and a texture.

Examples

The same square bin with its funnel lid lifted off and set beside it.
The same square bin with its funnel lid lifted off and set beside it.
Round black bin with Sticks written on its side and a fluted foot.
Round black bin with Sticks written on its side and a fluted foot.
Pink round bin with a spiral-ribbed band and a rounded lid with a slot.
Pink round bin with a spiral-ribbed band and a rounded lid with a slot.
Studio render of a stick bin with a terracotta spiral band and a lid with a slot.
Studio render of the generator's default piece.

How to make a stick bin

  1. Measure a stick

    Its width across - about 7.3 mm for most heated sticks. The slot or hole is cut to let one through.

  2. Size the bin

    Round, oval or square, the width and the height, the wall and the bottom.

  3. Choose the lid

    A rounded top with a slot (set its height, its neck and the slot length), or a flat funnel with a round hole.

  4. Add the band

    Its height and texture, in a second colour.

  5. Put a name on it

    Text or a logo on the side, inlaid or raised.

  6. Export and print

    The bin and the lid side by side, both standing up.

What you can change

Bin
Round, oval or square; 50 to 140 mm across, 60 to 220 mm tall; wall and bottom 1.6 to 4 mm; foot rounded 0 to 12 mm.
Lid
Slot: a shoulder 8 to 60 mm tall, a neck 40 to 95% of the bin, a slot 20 to 90 mm long. Funnel: a hole 10 to 40 mm across.
Band
10 to 150 mm tall; flutes, ribs, spiral, diamond, waves or plain.
Name or logo
Text in one of 11 fonts, 6 to 40 mm tall, or your logo (SVG, PNG or JPG) on the side: inlaid flush in a second colour, or raised 1 mm in the body's colour. A word too long for the room is set smaller, with a note.

Tip.The lid has a plug that goes into the mouth of the bin and sits on a 45 degree chamfer inside the rim, so it stays put and comes off with one hand. Both parts print upright without supports.

For heated sticks only. It is not an ashtray: PLA softens at about 60 °C, so never put a lit cigarette or hot ash in it.

The 3MF keeps each colour as its own object, so a printer with automatic filament changes (such as a Bambu Lab AMS) prints it in one go. With one colour, print every object in the same filament.

Questions

How do I empty it?

Lift the lid off and tip the bin out. The lid is a separate part that sits in the mouth of the bin.

Will my sticks fit through the slot?

Set your stick's width (5 to 12 mm); the slot or the hole is cut to let one through and keeps the rest of the top closed.

Can I use it as an ashtray?

No. It is made for used heated sticks, which are cool. Printed plastic softens with heat, so it is not for lit cigarettes or ash.

Does it need supports?

No. The bin, its band and the lid are all kept within 45 degrees and print standing up.

Can I put a name or a logo on it?

Yes. Upload an SVG, PNG or JPG; a picture is traced to one colour. Choose an inlay flush with the surface in a second colour, or a raised mark. You must hold the rights to what you upload.

What file do I get?

A 3MF, which keeps each colour as its own object for a multi-colour printer, or an STL. Every file is checked before it downloads: closed (watertight) geometry, a single shell and walls thick enough to print.

Is it free?

The free plan gives 3 designs a month on each generator. Selling the printed pieces needs the Seller or Studio plan, which include the commercial licence.

Licence

On the Free and Maker plans you may print your designs for yourself and as gifts, not for sale. Selling the printed pieces needs the Seller or Studio plan, which include the commercial licence and a licence certificate for each design. Pieces made during the free beta, before paid plans launched, may still be sold on the terms of that time. The exported files themselves can never be resold or redistributed, on any plan.

This is a summary. Read Can I sell rings I 3D print with Morcano? and the Terms, which are the authoritative text.

Keep reading